Product description
Type C is the engineered bespoke line for equipment that does not follow standard dimensions. The original CAD/BIM, CNC laser, 316 stainless eyelets and high-temperature Ceramic/Silica configuration are retained, while the refreshed content adds the Flexinsul process: survey, patterning, material selection and manufacturing to actual geometry.
Applications include pumps, motors, turbines, generators, heat exchangers, vessels, large flanges, probes/sensors and special machinery.
3D shaping through CAD/BIM or from technical drawings/on-site survey.
Precision CNC laser-cut fabrication with 316 stainless eyelets for dynamic load resistance.
Rockwool, Ceramic, Aerogel or Silica material options by temperature, environment and budget.
Detailed technical specifications
Detailed technical specifications
| Brand | Flexinsul Jacket |
|---|
| Designed for | Non-Standard Equipment: Pumps, Turbines, Heat Exchangers, Vessels, Sensors |
|---|
| Size | DN15 | DN20 | DN25 | DN32 | DN40 | DN50 | ... | DN300 | Other |
|---|
| Material options | Rockwool | Ceramic | Aerogel | Silica | Other based on survey |
|---|
| Density | 80 kg/m³ | 96 kg/m³ | Other |
|---|
| Standard thickness | 25mm | 50mm | 75mm | 100mm | Other |
|---|
| This type operating range | -150°C to 1000°C |
|---|
| This type material setup | Multilayer Ceramic fiber with high performance Silica textile |
|---|
| This type reference thickness | 50mm / 100mm |
|---|
| Energy saving | Up to 95% heat-loss reduction under suitable design conditions |
|---|
| Outer shell | Silicone-coated fiberglass cloth: water-resistant, heat-resistant, chemical-resistant |
|---|
| Sewing thread | SS Core Flame-Resistant Thread |
|---|
| Silicone shell temperature | Up to 260°C. Higher-temperature material options available |
|---|
The specifications above are for initial consultation. During actual implementation, Anton Therm adjusts the design by peak temperature, indoor/outdoor conditions, humidity, chemicals, vibration and removal requirements.
Required audit information
Survey information required
Overview and close-up photos of the component, including opening/removal direction for maintenance.
DN/key dimensions, length, bend radius, flange, nozzles or equipment geometry.
Normal operating temperature, peak temperature, pressure and heat-up/cool-down cycle.
Environment: indoor/outdoor, UV, steam, oil, chemicals, vibration and washdown.
Inspection, cleaning, bolt-tightening, drain or actuator/sensor removal frequency.
Acceptance criteria: target touch temperature, sealing, closure strength, reusability and finish quality.
If drawings are not available, Anton Therm can guide minimum measurement points or survey on site for pattern development.
